Radio Rig ICOM IC-M200 MARINE
Compact and IPX7 Submersible Body
Withstands 1m depth of water for 30 minutes.
Powerful Front Mount Speaker
Delivers loud and intelligible audio even in noisy maritime environments.
Class Leading Receiver Performance
No compromise in operating fundamentals (75dB typical IMD and selectivity).
Large Easy-to-see LCD
Large (WxH: 43x27mm) LCD shows essential infromation clearly with 4-step backlighting.
Dualwatch and Tri-watch Function
Monitors CH 16 and/or call channel, while using another channel.
Favorite Channel Function
Offers quick channel selection from the microphone up/down button.
AquaQuake™ Draining Function
Water free speaker grill for optimal audio at all times.
Other features Radio Rig ICOM IC-M200 MARINE :
- Accurate and reliable temperature compensated frequency stability
- Channel operation with the supplied hand microphone, HM-164B
- Instant-access button for Channel 16 and call channel
- Priority scan and Normal scan
- Built-in low voltage indicator
- Programmable private channels (subject to local regulations)
General
| IC-M200 | ||
|---|---|---|
| Frequency range | Tx | 156.025–162.000MHz |
| Rx | 156.025–162.025MHz | |
| Usable channel groups | INT, USA, CAN channels | |
| Type of emission | 16K0G3E (FM) | |
| Power supply voltage | 13.8V DC nominal (11.7V–15.9V DC) |
|
| Current drain | Tx (at 25W output) | 5.5A (Maximum) |
| Rx (Maximum audio) | 1.5A (Maximum) | |
| Operating temperature range | –20°C to +60°C; –4°F to +140°F | |
| Antenna impedance | 50Ω | |
| Dimensions (W×H×D) (Projections not included) |
153×67×133 mm; 6.0×2.6×5.2 inch |
|
| Weight (approximately) | 790g; 1.7lb | |
Transmitter
| Output power | 25W (High power) 1W (Low power) |
|
|---|---|---|
| Modulation | Variable reactance frequency modulation |
|
| Max. frequency deviation | ±5kHz | |
| Frequency stability | ±5ppm | |
| Spurious emissions | Less than –70dBc (High power) Less than –56dBc (Low power) |
|
| Adjacent channel power | More than 70dB | |
| Audio harmonic distortion | Less than 10% (at 60% dev.) | |
| Residual modulation | More than 40dB | |
Receiver
| Intermediate frequency | 1st | 21.7MHz |
|---|---|---|
| 2nd | 450kHz | |
| Sensitivity | –14dBμ typ. (at 12dB SINAD) | |
| Squelch sensitivity | Less than –10dBμ | |
| Adjacent channel selectivity | 75dB typical | |
| Spurious response | 75dB typical | |
| Intermodulation | 75dB typical | |
| Hum and noise | More than 40dB | |
| Audio output power | 4.5W typical (at 10% distortion with a 4Ω load) |
|
Measurements made in accordance with TIA/EIA 603. All stated specifications are subject to change without notice or obligation.
Applicable U.S. Military Specifications
| Standard | ||
|---|---|---|
| Temperature Shock | 503.5 | I-C |
| Rain Blowing | 506.5 | I |
| Humidity | 507.5 | II |
| Salt Fog | 509.5 | – |
| Vibration | 514.6 | I |
| Shock | 516.6 | I |
Also meets equivalent MIL-STD-810-C, -D, -E and -F.
Applicable IP Rating
| Ingress Protection Standard | ||
|---|---|---|
| Water | IPX7 (Waterproof protection)
|
|
Supplied Accessories
- Hand microphone, HM-164B
- DC power cable
- Mounting bracket kit
