Handy Talky Icom IC-U88

Spesifications of ICOM IC-U88 :

• Icom custom high power handling capacity speaker
• for 1500 mW powerful audio
• IP67 waterproof and dust-tight protection
• 5.5 W/4 W (VHF/UHF) of output power
• Up to 10 hours of operating time with the supplied waterproof battery
• 128 memory channels and eight zones
• Eight character alphanumeric display
• Built-in CTCSS and DTCS encoder/decoder
• Eight DTMF autodial memories
• MDC 1200 PTT ID and BIIS 1200 PTT ID
• Inversion voice scrambler (16 code) for private conversations
• Channel announcement of the operating channel number
• Seven programmable buttons with Shift key function
• 16 scan lists and priority scan functions
• Hands-free operation with the optional headset

General

• Frequency coverage 335–380 MHz
• Type of emissions 16K0F3E, 11K0F3E (25/12.5 kHz)
• Number of channels 128 channels
• Antenna impedance 50 Ω
• Power supply requirement 7.5 V DC
• Operating temperature range –30 °C to +60 °C (Radio only)
• Frequency stability ±2.5 ppm
• Current drain (Approximate)
• Tx High
• Rx Maximum audio/Stand-by
• 1.5 A
• 500 mA (Internal SP) / 77 mA
• 1.3 A
• 500 mA (Internal SP) / 80 mA
• Dimensions (W×H×D)
• (Projections not included)
• 52.2 × 111.8 × 22.3 mm (with BP-278)
• Weight (Approximate) 230 g (with BP-278)

Transmitter

• Output power (at 7.5 V DC) 5.5/ 2.0/ 1.0 W (Hi/L2/L1) 4.0/ 2.0/ 1.0 W (Hi/L2/L1)
• Maximum frequency deviation ±5.0 kHz/±2.5 kHz (Wide/Narrow)
• Spurious emissions 70 dB minimum
• External microphone connector 3-conductor 2.5 (d)mm (1/10ʺ)/2.2 kΩ

Reciever

• Sensitivity 0.25 μV typical (at 12 dB SINAD)
• Squelch sensitivity 0.25 μV typical (at threshold)
• Adjacent channel selectivity 76 dB/ 53 dB typical (W/N) 73 dB/ 56 dB typical (W/N)
• Intermodulation 74 dB typical 73 dB typical
• Spurious response 70 dB minimum
• Audio output power
• Internal speaker
• External speaker
• 1500 mW typical (8 Ω load)
• 400 mW typical (8 Ω load)
• External speaker connector 3-conductor 3.5 (d) mm (1⁄8ʺ)/ 8 Ω
• Measurements made in accordance with EIA/TIA-603.
• All stated specifications are subject to change without notice or obligation.
• Applicable U.S. Military Specifications & IP Rating
• Standard MIL 810G
• Method Procedure
• Low Pressure 500.5 I, II
• High Temperature 501.5 I, II
• Low Temperature 502.5 I, II
• Temperature Shock 503.5 I-C
• Solar Radiation 505.5 I
• Rain Blowing/Drip 506.5 I, III
• Humidity 507.5 II
• Salt Fog 509.5 –
• Dust Blowing 510.5 I
• Immersion 512.5 I
• Vibration 514.6 I
• Shock 516.6 I, IV
• Also meets equivalent MIL-STD-810-C, -D, -E and -F.
• Ingress Protection Standard
• Dust & Water IP67 (Dust-tight and waterproof protection)