Handy Talky Icom IC-F4033T

Supplier Handy Talky Icom IC-F4033T dari Produk Icom

Specifications VHF and UHF Transceivers IC-F3033T/S IC-F4033T/S

General

• Frequency coverage 136–174 MHz
• 400–470 MHz
• 450–520 MHz
• Number of channels 128 channels/8 zones
• Type of emission 16K0F3E/11K0F3E
• Channel spacing 25/12.5 kHz
• Power supply requirement 7.2 V DC nominal
• Current drain (approximate)
• Tx High
• Rx Max. audio/Standby
• 1.5 A (at 5 W)
• 250 mA/75 mA
• 1.6 A (at 4 W)
• 300 mA/75 mA
• Antenna impedance 50 Ω
• Operating temperature range –30 °C to +60 °C (Radio specifications)
• Dimensions (W × H × D)
• (Projections not included)
• 53 × 120 × 37 mm (With BP-232WP)
• Weight (approximate) 310 g (With BP-232WP)

Transmitter

• Output power (at 7.2 V DC) 5 W, 2 W, 1 W (Hi, L2, L1) 4 W, 2 W, 1 W (Hi, L2, L1)
• Max. frequency deviation ±5.0/±2.5 kHz (Wide/Narrow)
• Frequency stability ±2.5 ppm
• Spurious emissions 80 dB typ. 70 dB min.
• FM Hum and Noise 46/40 dB typ. (Wide/Narrow)
• Audio harmonic distortion 3% typ. (AF 1 kHz 40% deviation)
• Ext. microphone connector 3-conductor 2.5 (d) mm (1⁄10ʺ)/2.2 kΩ

Reciever

• Sensitivity (at 12 dB SINAD) 0.25 μV typ.
• Adjacent channel selectivity 75/65 dB typ. (Wide/Narrow)
• Spurious response rejection 70 dB min.
• Intermodulation rejection 75 dB typ. 74 dB typ.
• Hum and noise 55/50 dB typ. (W/N) 45/40 dB typ. (W/N)
• Audio output power 500 mW typ. (at 5% distortion, 8 Ω load)
• Ext. speaker connector 2-conductor 3.5 (d) mm (1⁄8ʺ)/8 Ω
• Measurements made in accordance with EIA/TIA-603.
• All stated specifications are subject to change without notice or obligation.
• Applicable U.S. Military Specifications & IP Rating
• Standard MIL 810G
• Method Procedure
• Low Pressure 500.5 I, II
• High Temperature 501.5 I, II
• Low Temperature 502.5 I, II
• Temperature Shock 503.5 I-C
• Solar Radiation 505.5 I
• Rain Blowing/Drip 506.5 I, III
• Humidity 507.5 II
• Salt Fog 509.5 –
• Dust Blowing 510.5 I
• Immersion 512.5 I
• Vibration 514.6 I
• Shock 516.6 I, IV
• Also meets equivalent MIL-STD-810-C, -D, -E and -F.
• Ingress Protection Standard (IC-F3033T/S, F4033T/S, BP-232WP & HM-168LWP)
• Dust & Water IP67 (Dust-tight and waterproof protection)