GW Instek GCP-530 50MHz/30A Current Probe (Oscilloscope Accessories)

GW Instek GCP-530 50MHz/30A Current Probe

Features
• Bandwidths : DC~50 MHz and 100 MHz
• High S/N Ratio : Ideal for Measuring mA Signals
• DC and AC Measurements
• Better than 1% Accuracy
• Direct Connection to High-impedance 1ΩM BNC Oscilloscope Inputs
• Demagnetize Switch : Demagnetizes the Core to Remove any Residual Magnetism
• Simple Overload Protector Prevents Damage Due to Overheating
• 2 Channel or 4 Channel Current Probe Power Supplies Designed for the GCP-530 and GCP-1030 Clamp Probes, The Power Supplies are Ideal for When Power is not Available From an Oscilloscope or for General Current Measurement Applications

Specifications
Probe Bandwidth : DC – 50MHz
Rise Time : 7ns or less
Maximum Continuous Input Range : 30A RMS
Maximum Peak Current Value : 50A peak
Output Voltage Rate : 0.1V/A
Amplitude Accuracy : ±1.0%rdg ±1mV (0~30Arms/DC, 45~66Hz); ±2.0%rdg (30Arms~50A peak/DC, 45~66Hz)
Noise : 2.5mA RMS or less
Rate Supply Voltage : ±12V ±0.5V
Conductor Diameter : Max. 5mm
Maximum Rated Power : 5.6VA
Maximum Rated Voltage : 300V, CAT I
Safety Standards : EN6010, Over voltage category II, III (anticipated transient over voltage 4000V). Pollution degree 2