SAMYUNG BNW-50 Bridge Navigational Watch Alarm System
Detail Produk
SAMYUNG BNW-50 Bridge Navigational Watch Alarm System
The SAMYUNG BNW-50 Bridge Navigation Watch Alarm System (BNWAS) is an essential safety device designed to improve maritime navigation by ensuring that bridge watchstanders remain alert and attentive. This advanced system monitors the activities of duty officers and triggers an alarm if it detects inactivity or signs of drowsiness, thus preventing potential accidents due to human error. The system plays a vital role in promoting safe maritime operations, especially during long voyages or in challenging sea conditions.
Features
- Comply with IMO Res. 128 (75), IMO Res.A.694 (17), IEC 62616 (2010), IEC 60945 (2002) & IEC 61162 (2007).
- ALR (alarm) sentence output (IEC 61162) for VDR.
- Responds to the other navigational equipment’s ALR (alarm) and EVE (event) sentence input.
- Time display function once GPS signal is connected.
- Easy to extend the function due to the availability of various options.
- Function that monitors the bridge activity and detects operator disability which could lead to marine accidents
- Alerts the stand-by officer when the watch officer does not respond to the visual and audible alarm.
- Equipped with emergency call and navigator call button.
- Automatic reset function that detects the movement of the watch officer by using the motion sensor.
- Use of password protects the control of setup menu
- Easy to operate since display uses numbers and graphics.
Specifications
DISPLAY UNIT (SAMYUNG BNW-50) |
|
| Screen Size | 4.3-inch TFT color LCD, 470 x 272 pixels |
| Power Consumption | 130mA, power save mode 70 mA (24 V DC) |
| Size | 129 (H) x 183 (W) x 113.5 (D) mm |
| Weight | 0.5kg |
| Operation Temperature | -15°C to 55°C |
PROCESSOR UNIT (BNW-51) |
|
| Main Power Supply | 110V / 220V AC |
| Back-Up Power Supply | 24V DC (for 6 hour, min 3 Ah) |
| Power Consumption | 130mA |
| Size | 221 (H) x 165 (W) x 95 (D) mm |
| Weight | 1.5kg |
| Operation Temperature | -15°C to 55°C |
| Interface | Reset pulse by radar. Interface of operating track controller NMEA data (Reset, alarm, etc) DC12V power supply and reset of motion sensor and reset unit. Alarm signal for reset and alarm unit. NMEA data for Blackbox (VDR) Alarm interface for machine breakdown Interface for the external unit’ s alarm. Input/Output DC23V power supply and RS-232 communication for display unit. |
RESET UNIT (BNW-52) |
|
| Power Consumption | max 34mA / unit (24V DC) |
| Size | 126 (H) x 90 (W) x 30 (D) mm |
| Weight | 0.2kg (flush type), 0.5kg (desk type), 0.5kg (watertight type) |
| Operation Temperature | -15°C to 55°C |
| Level of Water Resistance | IP67 (watertight type) |
| Level of Sound | Over 75dB |
| Function | Reset, visual alarm, 1st stage audible alarms are combined (You may choose one function if you wish to). |
ALARM UNIT (BNW-53) |
|
| Power Consumption | max 30mA / unit (24V DC) |
| Size | 126 (H) x 90 (W) x 30 (D) mm |
| Weight | 0.2kg (flush type), 0.5kg (desk type) |
| Operation Temperature | -15°C to 55°C |
| Level of Sound | Over 75dB |
MOTION SENSOR (DND-300M) |
|
| Power Consumption | Operating = 26mA / unit, Stand-by = 17mA / unit (12V DC) |
| Detection Method | Quad-element PIR and microwave pulse doppler |
| MW Frequency | 10.525GHz |
| Size | 115 (H) x 61 (W) x 37.5 (D) mm |
| Weight | 120g (Bracket included) |
| Operation Temperature | -15°C to 55°C |
| Detective Angle | 120° to 150° |
| Detective Range | 15m (standard) |
| Pre-Heating Time | 1 minute |
STANDARD EQUIPMENT LIST |
Display unit (BNW-50) ———- 1set Processor unit (BNW-51) ——– 1set Reset unit (BNW-52) ———– 3set Alarm unit (BNW-53) ———– 7set Motion sensor (DND-300M) —— 2set Installation Materials, Instruction Manual |
Produk Terkait
