| Optical fiber requirements |
| Material |
Silica glass |
| Profile types |
SMF (ITU-T G.652), MMF (ITU-T G.651), DSF (ITU-T G.653), NZDSF (ITU-T G.655), BIF (ITU-T G.657), EDF |
| Fiber diameter |
Cladding diameter: 80 µm ~ 150 µm, Coating diameter: 100 µm ~ 1,000 µm |
| Applicable fiber or cable size |
up to φ1,000 µm |
Drop cable (2.0×3.1 mm), Indoor cable (2.0×2.0 mm) |
| Cleave length |
5~16 mm |
10 mm |
| Standard performance |
| Splice loss (typical) |
SMF: 0.02 dB, MMF: 0.01 dB, DSF: 0.04 dB, NZDSF: 0.04 dB |
| Splicing cycle time (typical) |
7 sec. (Quick mode), 7.5 sec. (SMF standard mode), 8 sec. (Auto mode) |
| Heating cycle time (typical) |
28 sec. |
| Splice & Heat cycles |
Approx. 200 |
| Fiber view & magnification |
Two CMOS cameras observation, 320X (zoom: 700X) for X or Y single axis view, 88X for both X & Y dual axis view |
| Splicing programs |
Max. 300 |
| Heating programs |
Max. 100 |
| Functions |
| Loss estimation |
Provided |
| Splice image capture / Splice data storage |
64 images / 10,000 splice data |
| Proof test |
1.96N (200 gf) |
| Universal clamps for 250µm, 900µm tight & loose buffer fiber |
Provided |
| Reversible coating clamps |
Provided |
| Dual automatic independent heaters |
Provided (US patent 7,412,146) |
| User-selectable heater clamp operation |
Provided |
| Onboard user training video |
Provided |
| Automatic arc calibration |
Automatically compensates for environmental condition changes |
| Arc test |
Provided |
| Display of remaining Splice & Heat cycles |
Provided (Battery mode) |
| Remote interactive maintenance |
Provided |
| Terminals |
| DC output |
DC12 V (for JR-6) |
| USB port |
USB 2.0 (mini-B type) |
| Storage media |
SD / SDHC memory card |
| Power supply |
| AC input |
100 ～ 240V, 50 / 60 Hz (ADC-1430) |
| DC input |
10 ～15 V |
| Battery module |
Li-ion 11.1 V, 4,600 mAh (BU-11) |
| Mechanical Parameters |
| Monitor |
4.1″ touch screen color LCD display |
| Size |
120(W) x 154(D) x 130(H) mm (without anti-shock rubber) |
| Weight |
1.8 kg (without battery), 2.1 kg (with battery) |
| Electrode life |
3,000 arc discharges |
| Environment |
| Operating conditions |
Altitude 0～6,000 m, Temperature -10～+50°C, Humidity 0～95% (non-condensing), Wind velocity up to 15 m/s |
| Storage conditions |
Temperature -40～+80°C, Humidity 0～95% (non-condensing), Battery -20～+30°C (long term) |
| Dust resistance |
Equivalent to IP5x (Operates normally after 8 hours in a dust chamber (containing dust of particle size 25 µm or below |
| Water resistance |
Equivalent to IPx2 (Operates normally after being exposed to water dripping at 3mm/min. for at least 2.5 min on each of 4 surfaces tilted at 15°) |
| Shock resistance |
Drop from 76cm on 5 faces (excluding top face) |
