Hanna HI-700 Ammonia Low Range Colorimeter
Detail Produk
Hanna HI-700 Ammonia Low Range Colorimeter
- Desain seukuran telapak tangan kecil
- Akurat dari ±0,05ppm ± 5% pembacaan
- Didedikasikan untuk satu parameter
- Menggunakan baterai AAA tunggal
- Auto Power Off setelah 10 menit tidak aktif
- Timer bawaan untuk pembacaan reaksi berwaktu
Ideal for fresh water aquariums
The HI-700 Ammonia Low Range Checker is a simple, accurate and cost effective way to measure low ranges of ammonia in fresh water.
Designed as a more accurate alternative to chemical test kits, the HI-700 provides quick, accurate results in four easy steps.
HI-700 uses an adaptation of the ASTM Manual of Water and Environmental Technology, D1426-92, Nessler method. The reaction between ammonia and reagents causes a yellow tint in the sample.
Ideal for
- Freshwater Aquariums
- Water Quality
- Education
- Wastewater
- Environmental
Key features
- Small palm-sized design
- Accurate from ±0.05ppm ± 5% of reading
- Dedicated to a single parameter
- Uses a single AAA battery
- Auto Power Off after 10 minutes in inactivity
- Built-in timer for timed reaction readings
Four steps. One click. Instant Readout.
- ‘Zero’ the Checker®HC with your vial & 10ml water sample inside
- Take vial out and add your reagent
- Place your vial into your Checker®HC
- Press the button and read the results
Battery powered – Allows use away from a power source. Batteries are included with all battery operated products.Use Reagents HI-700-25 with the HI-700 Ammonia Low Range Colorimeter – Checker®HC, x 25 tests.
Use Calibration Check Set HI-700-11 with the HI-700 Ammonia Low Range Colorimeter – Checker®HC.
Specifications Hanna HI-700 Ammonia Low Range Colorimeter
| Range | 0.00 to 3.00 ppm NH3-N | |
| Resolution | 0.01 | |
| Accuracy @ 25°C | ±0.05 ppm ±5% of reading | |
| Light source | LED @ 470 nm | |
| Light Detector | Silicon photocell | |
| Method | Adaptation of the ASTM Manual of Water and Environmental Technology D1426-92, Nessler Method. The reaction between ammonia and reagents causes a yellow tint in the sample. | |
| Environment | 0 to 50°C; RH max 95% non-condensing | |
| Battery Type | (1) 1.5V AAA | |
| Auto-off | After ten minutes of non-use | |
| Dimensions | 81.5mm x 61mm x 37.5mm | |
| Weight | 64g | |
| Ordering Information | HI-700 Checker® is supplied with (2) sample cuvettes with caps, ammonia reagent starter kit for 25 tests (1 bottle of HI-700A-0 reagent A and 1 bottle of HI-700B-0 reagents B), battery, instructions. |
| PLEASE NOTE: | In some cases, samples may contain other parameters which may interfere with results | |
| Interference may be caused by: | Hardness above 1 g/L Iron Sulphide Glycine Various aliphatic and aromatic amines Organic chloramines Acetone Aldehydes alcohols |
Hanna HI-700 – Manual
Produk Terkait
